POWER ARM 50

The Power Arm 50 Hy-Reach has a reach of 5.0m and is suitable for mounting onto tractors of 60hp and over 3000kg.

The improved three point linkage mounting system allows this machine to be closer coupled to the tractor, making it easier and safer to mount onto the tractors linkage.

Easy access from the rear covers reveals the mechanics of the machine which is available with Semi Independent hydraulics or totally Independent hydraulics complete with cable rotor rotation control. The cast iron Hy-Power pump and motors supply incredible power to the flail circuit fro increased performance. With the option of either the 1.2m Sliding Multicut Flailhead, 1.2m Multicut Flailhead or the 1.5M Super Multicut Flailhead. All are fitted as standard with an adjustable rear roller, rear rubber flap kit, front hood with wire trap and a choice of flails.

The control systems available on the PA50 are the progressive Cable Controls, Electric Switchbox, Mono Lever and the Proportional Digital Armrest controls.

The PA50 is fitted with Parallel Arm Geometry, with a high mounted rocker creating unrivalled arm geometry for hedge and verge cutting, when working in the tightest of environments. Power slew is fitted as standard which enables cutting in awkward corners and otherwise inaccessible areas, a compact transport position can be achieved within all tractor widths. The hydraulic safety breakaway complete with automatic reset safeguards the machine from obstacles.

Power Arm 50 Specification Table S = Standard O = Option
DESCRIPTION		PA50
TRACTOR REQUIREMENT	Tractor Horse Power Requirement	60hp
	Minimum Tractor Weight	3000kg
METHOD OF ATTACHMENT	3 Point Linkage Mounted	S
REACH	Maximum Reach (meters)	5.0m
WEIGHT	Machine with Flailhead (excluding oil)	1104kg
SIDE OF CUT	RH or LH	O
FEATURES & OPTIONS
ARM GEOMETRY	Paralell Linkage to Maintain Flailhead at Pre-set height irrespective of reach	S
HYDRAULIC SYSTEM	Semi Independent Hydraulics	S
	Totally Independent Hydraulics	O
CONTROL SYSTEM	Progressive Cable Controls	S
	Switchbox Controls	O
	Mono Lever Electric Controls	O
	Proportional Digital Armrest Controls	O
POWER SLEW	100 Degrees of Power Slew	S
MIDCUT PACK	Brings Flaihead position forward for better visibility	O
OIL COOLER	Improves machine performance and prolongs oil life	O
OIL TANK CAPACITY	180 Litres With Twin Filter as Standard	S
SAFETY BREAKAWAY	Hydraulic Safety Breakaway of 100 Degrees with Hydraulic Auto Reset	S
LIGHTING	Integral light bar gives added safety and visibility for road use	O
ANGLE FLOAT	Allows flailhead to oscillate following angle changes in ground contours	S
PASSIVE LIFT FLOAT	Enables Flailhead to Follow Changes In Ground Contours	O
HEAD MOVEMENT	245 Degrees Continuous	S
WINDOW GUARD	Screening Protection Supplied as Standard	S
FLAILHEAD FEATURES
WIDTH OF CUT	1.2m Sliding Supercut Flailhead	S
	1.2m Sliding Multicut Flailhead	O
	1.5m Super Multicut Flailhead	O
FLAILHEAD DRIVE	Direct Drive - Heavy Duty 27 Spline Coupling	S
FLAILHEAD MOTOR HP	54hp Motor with Protective Side Guards	S
FLAIL CONTROL	Cable Rotor Rotation Reverse (TI models only)	S
FLAIL OPTIONS	Interchangeable Flail System a) F10 hedge b)Grass Flail c) Universal Boot Flail	O
WIRE TRAP	Built into Hood for Maximum Safety to Prevent Wire Being Thrown Forward	S
REAR ROLLER	Heavy Duty Rear Roller	S
OMEGA ROTOR ASSEMBLY	Extra Heavy Duty rotor with omega flails	O
ACCESSORIES
FRONT FLAP KIT	To Prevent Loose Material Being Thrown Forward	O
SKID KIT	Side Skid with Replaceable Shoes to Reduce Scalping and Flail Wear	O
ORBIER HEAD BRACKET	Positions flail head behind tractors wheel for cutting in narrow lanes	O
DEBRIS BLOWER	Removes hedge and grass cuttings from roads, reducing the risk of punctures (TI Models only)	O
BUZZBAR	Circular cutting blades	O