POWER ARM 53

The Power Arm 53 has a reach of 5.3m and is suitable for mounting on tractors of 65hp and over 3500kg.

The new three point linkage system provides better ground clearance and closer fitting to the tractor for improved weight distribution. The cushioned top link allows dual movement to absorb shock loads when travelling on uneven road surfaces, preventing damage to the machine whilst increasing the comfort for the operator.

The PA53 is available with either Semi or Totally Independent hydraulics complete with rotor rotation control. The Hy-Power cast iron pumps and motor provide greater power to the cutting head. With the option of a 1.2m Sliding Supercut, 1.2m Heavy Duty Multicut and the 1.5m Super Multicut on the PA52 there are plenty of powerful cutting options.

The control systems available are the Progressive Cable Control, Electric Switchbox Control, Mono Lever Control and the award winning Proportional Digital Armrest Control. The McConnel Easy Drive System (EDS) is also available on the PA53 for a much safer more efficient grass cutting.

The PA53 is also available as a specialist front mount machine, for mounting onto the front linkage of tractors and also as a reverse drive for use on reverse drive tractors.

Power Arm 52 Specification Table S = Standard O = Option
DESCRIPTION		PA53
TRACTOR REQUIREMENT	Tractor Horse Power Requirement	65hp
	Minimum Tractor Weight	3500kg
METHOD OF ATTACHMENT	3 Point Linkage Mounted	S
REACH	Maximum Reach (meters)	5.3m
WEIGHT	Machine with Flailhead (excluding oil)	1347kg
SIDE OF CUT	RH or LH	O
FEATURES & OPTIONS
ARM GEOMETRY	Paralell Linkage to Maintain Flailhead at Pre-set height irrespective of reach	S
HYDRAULIC SYSTEM	Semi Independent Hydraulics	S
	Totally Independent Hydraulics	O
CONTROL SYSTEM	Progressive Cable Controls	S
	Switchbox Controls	O
	Mono Lever Electric Controls	O
	Proportional Digital Armrest Controls	O
POWER SLEW	100 Degrees of Power Slew	S
MIDCUT PACK	Brings Flaihead position forward for better visibility	O
OIL COOLER	Improves machine performance and prolongs oil life	O
OIL TANK CAPACITY	200 Litres With Twin Filter as Standard	S
SAFETY BREAKAWAY	Hydraulic Safety Breakaway of 100 Degrees with Hydraulic Auto Reset	S
LIGHTING	Integral light bar gives added safety and visibility for road use	S
ANGLE FLOAT	Allows flailhead to oscillate following angle changes in ground contours	S
PASSIVE LIFT FLOAT	Enables Flailhead to Follow Changes In Ground Contours	O
EASY DRIVE SYSTEM	Electronic flotation system for high speed verge mowing	O
HEAD MOVEMENT	245 Degrees Continuous	S
WINDOW GUARD	Screening Protection Supplied as Standard	S
FLAILHEAD FEATURES
WIDTH OF CUT	1.2m Sliding Supercut Flailhead	S
	1.2m Heavy Duty Multicut Flailhead	O
	1.5m Super Multicut Flailhead	O
FLAILHEAD DRIVE	Direct Drive - Heavy Duty 27 Spline Coupling	S
FLAILHEAD MOTOR HP	60hp Motor with Protective Side Guards	S
FLAIL CONTROL	Rotor Rotation Reverse (TI models only)	S
FLAIL OPTIONS	Interchangeable Flail System a) F10 hedge b) Grass Flail c) Universal Boot Flail	O
WIRE TRAP	Built into Hood for Maximum Safety to Prevent Wire Being Thrown Forward	S
REAR ROLLER	Heavy Duty Rear Roller	S
OMEGA ROTOR ASSEMBLY	Extra Heavy Duty rotor with omega flails	O
ACCESSORIES
FRONT FLAP KIT	To Prevent Loose Material Being Thrown Forward	O
SKID KIT	Side Skid with Replaceable Shoes to Reduce Scalping and Flail Wear	O
TIMBER CAT	1.5m Heavy Duty Cutterbar	O
ORBIER HEAD BRACKET	Positions flail head behind tractors wheel for cutting in narrow lanes	O
DEBRIS BLOWER	Removes hedge and grass cuttings from roads, reducing the risk of punctures (TI Models only)	O
BUZZBAR	Circular cutting blades	O