TOPPER 9

The all shaft drive of the 'Topper 9' enables this one machine to tackle everything from the lightest pasture topping to the heaviest set-a-side mowing without the worry of belt slip or breakage.

The reliable mechanical transmission is protected by a slip clutch, to prevent excessive torque through the drive train.

Reliability is the reason behind the heavy duty laminated height control wheels. Two are fitted to give an accurate cutting height on undulating ground. these carry the 'Topper9' clear of wet ground, where competitive products are dragged along on skids which may damage the swath.

Topper 9 Specification Table		S = Standard O = Option
DESCRIPTION
TRACTOR REQUIREMENT	Tractor Horse Power Requirement		50hp
METHOD OF ATTACHMENT	3 Point linkage mounted Cat II		S
PTO SPEED	Speed of PTO shaft		540rpm
CLUTCH TYPE	Slip clutch		S
GEARBOXES	Power of gearboxes 100hp main 40hp wing		S
CUTTING WIDTH	Maximum cutting reach		2.75m
WEIGHT	Machine weight		950kg
OVERALL WIDTH	Overall width of machine		3m
OVERALL LENGTH TRANSPORT	Overall length of machine		3m
CUTTING CAPACITY	Maximum diameter of cut		50mm
BLADE TIP SPEED	Blade speed measured at the tip (m/sec)		4670m/min
BLADE OVERLAP	Distance which blades overlap		85mm
NUMBER OF ROTORS	Number of rotors on machine		2
CUTTING HEIGHT	Cutting height min/max		25-300mm